Search This Blog

Monday, 21 December 2015

Reset Service Password in VNXe Series

1. On the back of the disk processor enclosure, locate the password reset button on either Storage Processor. It's located in a small hole and label below shows 'two triangles pointing at each other'.


2. Using a pen or a paper clip or similar blunt object, press and hold the password reset button (approximately 1 to 2 seconds) until the fault LED flashes blue. You only need to press the button on one of the storage processors (SPs). Approximately two minutes later, the Fault LED turns steady blue.

Note :- Be careful !!  Pressing the reset button for more than 10 seconds will reset (reboot) the storage processor.


3. Connect to VNXe using a browser and logon as admin with default password. The default password for both admin account and service account is Password123# .  After logging in you will be prompted  to reset the default passwords for the admin and service accounts.

Note: This procedure changes the password for both admin and service accounts.


If you already know the password and want to change:

Admin account:

Settings > More Configuration.. > Manage Administration > select admin and click on reset password.
 
Service account:

Settings > Service System > click on change service password and Execute service action.

OR

You can also use svc_service_password from an SSH session.



Monday, 14 December 2015

How to Collect GRAB in VMware ESX/ESXi

PFB the procedure to gather EMC Host Grabs in VMware ESX/ESXi:

You can get the GRAB utility from EMC Support Team or Partner Engineers.

Steps:
1
      Open cmd in Windows.

2       Execute java -version command to verify that Java is installed properly or not. If you get the output of this command with the java version information, then the java is installed properly, otherwise you need to install Java first. If it is required to install java, you can download the latest version of JDK from www.oracle.com > Java > Java SE.

3       Extract the ZIP files in your laptop.

4       Change your current working directory to the directory where you have placed EMC host grab utility. Suppose you have placed the grab utility in the C:\ drive then the command would be:

C:\> cd C:\EMC-ESXi-GRAB-1.3.X

5       Below is the command to gather the EMC host grabs for VMware host. Before running this command please gather the information from the customer like IP address, username and password of ESXi Server, IP address of SPA and SPB, username and password for all the storages attached to that host as this command will ask to enter these details.

C:\EMC-ESXi-GRAB-1.3.X> ./emcgrab.exe –host <IP_Address_of_ESXi> -user <username_of_ESXi> -password <password_of_ESXi> -vmsupport

6       It will ask you enter some information related to the customer site like name, address, site id etc. and after entering all the information, host grabs gathering process will start with “………………” and you will get cmd prompt back after some time. Let the command run properly.


7       Output will be saved under the folder name as “Output” in the same directory where you have placed ESXi host grab utility in your windows machine. In this case the path would be “C:\EMC-ESXi-GRAB-1.3.x\Output”. The output file will be in .zip format.

How to collect Support Material in EMC Celerra / VNX Storage


Step to Collect Support Materials in Celera or VNX Storage:


1. Open Putty and SSH to the Control Station IP address.

2. Log into CS using the nasadmin user

3. Become the root user

      $ su
      Password:

4. Start the script using the below command. No intervention is required.

        # /nas/tools/collect_support_materials

5. Output of the script will be saved in /nas/var/emcsupport

6. Look for the latest file support_materials_CK200XXXXXXXXX.Date_Time.zip

7. Transfer the file to your desktop using a FTP transfer method.